What the public permit record shows, not self-reported reviews.
Is ALLOY DESIGN GROUP INC a real contractor?
ALLOY DESIGN GROUP INC appears in public building-permit records with 23 permits filed through 2009 in and around City of Philadelphia, PA. Permits are filed with local government before work begins, so this is a matter of public record, not a self-reported listing.
How is ALLOY DESIGN GROUP INC's track record verified?
Every figure on this page comes from building permits pulled from municipal records and matched to ALLOY DESIGN GROUP INC by the contractor name on each permit. Permit records cannot be purchased or faked the way online reviews can, which makes them a stronger signal of real, completed work.
Is ALLOY DESIGN GROUP INC licensed and insured?
This profile is built from permit records, which confirm permitted work but do not include license status. ALLOY DESIGN GROUP INC has not claimed this profile to add license or insurance details. Confirm licensing directly with your state or local board before hiring.
How recent is ALLOY DESIGN GROUP INC's work?
The most recent permit on record for ALLOY DESIGN GROUP INC is dated 2009-06-08, with 23 permits on file in total.
REMOVE AND REPLACE EXISTING ROOF DECK, FRAMING, BOARDS AND RAILINGS. REPLACE EXISTING SKYLIGHT, NEW ROOFING BITUMEN MEMBRANE FOR EXISTING ROOF, AS PER PLAN.City of Philadelphia · 2009
FOR THE ERECTION OF A ROOF DECK AT THE FOURTH FLOOR LEVEL (MORE THAN 12" ABOVE THE THIRD FLOOR ROOF) AS PART OF AN EXISTING FOUR/THREE STORY BUILDING, (SIZE AND LOCATION AS SHOWN IN THE APPLICATION).FOR THE EXTENSION OF SIX (6) EXISTING FAMILY UNITS.City of Philadelphia · 2009
DEMOLISH AND CONSTRUCT EXTERIOR STAIRS.City of Philadelphia · 2008
CONSTRUCTION OF A NEW 3 STORY STRUCTURE, AS PER SUBMITTED PLANS, NO UNDERPINNING OF ADJACENT PROPOERTIES APPROVED OR PROPOSED. MUST SUPPORT AND LATERALLY BRACE ALL ADJACENT PARTY WALLSCity of Philadelphia · 2008
REVISE PERMIT # 143930 TO SHOW CEILING ASSEMBLY, SHOW AS BUILT FOR MECHANICAL ROOM AREA. USING EXISTING MASONRY OPENING. REVISE ENTRY TO 2ND FLOOR UNIT.City of Philadelphia · 2008
CONSTRUCT RETAINING WALL AT REAR MUST BE LESS THAN 4' IN HEIGHT, 12" SPREAD FOOTING,-30" BELOW GRADE, 8" CONCRETE BLOCK WITH WEEP HOLES, STUCCO/BRICK FACECity of Philadelphia · 2008
CONSTRUCT RETAINING WALL AT REAR MUST BE LESS THAN 4' IN HEIGHT, 12" SPREAD FOOTING,-30" BELOW GRADE, 8" CONCRETE BLOCK WITH WEEP HOLES, STUCCO/BRICK FACECity of Philadelphia · 2008
Republishing these numbers? A link back is all we ask — one click copies a ready credit you can paste into any post.
Are you ALLOY DESIGN GROUP INC?
This profile was built from public permit records. Claim it free to add your photo, phone, and website, so the homeowners landing here can actually reach you.
Add this Permit-Verified badge to ALLOY DESIGN GROUP INC's website. It links to this profile so homeowners can see the public permit record behind your work.
Track record sourced from public building-permit records. Figures reflect permitted projects, not self-reported work. Listed on Proven Pros.
CONSTRUCT RETAINING WALL AT REAR MUST BE LESS THAN 4' IN HEIGHT, 12" SPREAD FOOTING,-30" BELOW GRADE, 8" CONCRETE BLOCK WITH WEEP HOLES, STUCCO/BRICK FACECity of Philadelphia · 2008
CONSTRUCT RETAINING WALL AT REAR MUST BE LESS THAN 4' IN HEIGHT, 12" SPREAD FOOTING,-30" BELOW GRADE, 8" CONCRETE BLOCK WITH WEEP HOLES, STUCCO/BRICK FACECity of Philadelphia · 2008
CONSTRUCT RETAINING WALL AT REAR MUST BE LESS THAN 4' IN HEIGHT, 12" SPREAD FOOTING,-30" BELOW GRADE, 8" CONCRETE BLOCK WITH WEEP HOLES, STUCCO/BRICK FACECity of Philadelphia · 2008
INTERIOR / EXTERIOR ALTERATIONS AS PER SUBMITTED PHC APPROVED AND SEALED PLANSCity of Philadelphia · 2008
AMEND A/P# 123411. CHANGING 8" THICK POURED CONCRETE FOUNDATION WALLS TO 8" REINFORCED CMU.City of Philadelphia · 2008
Permitted projects on public record. Addresses are omitted for privacy.