What the public permit record shows, not self-reported reviews.
Is Ace Hardware Home Services, Inc. a real contractor?
Ace Hardware Home Services, Inc. appears in public building-permit records with 17 permits filed through 2026 in and around City of Philadelphia, PA. Permits are filed with local government before work begins, so this is a matter of public record, not a self-reported listing.
How is Ace Hardware Home Services, Inc.'s track record verified?
Every figure on this page comes from building permits pulled from municipal records and matched to Ace Hardware Home Services, Inc. by the contractor name on each permit. Permit records cannot be purchased or faked the way online reviews can, which makes them a stronger signal of real, completed work.
Is Ace Hardware Home Services, Inc. licensed and insured?
This profile is built from permit records, which confirm permitted work but do not include license status. Ace Hardware Home Services, Inc. has not claimed this profile to add license or insurance details. Confirm licensing directly with your state or local board before hiring.
How recent is Ace Hardware Home Services, Inc.'s work?
The most recent permit on record for Ace Hardware Home Services, Inc. is dated 2026-05-19, with 17 permits on file in total.
REPLACE WIRING BY FISHING WIRING THROUGHOUT MAKING NOTCHES AND HAND HOLES
UNFINISHED BASEMENT AREA
- Basement lighting and (3) receptacles
BASEMENT HALLWAY
- Hallway lighting and 3-gang switches
BASEMENT LAUNDRY ROOM
- 30-amp dryer receptacle
- Laundry light and switch
- (2) receptacles
GARAGE
- (2) lights and switch
- Pool filtration system
- Garage door receptacle
KITCHEN
- 3-way main kitchen lighting switch
- 4-gang kitchen switches. Entry light/main lighting/sink (Fourth switch is unknown. Need to investigate further.)
- 2-gang switches. Under cabinet lights
- (1) countertop receptacle
- Range hood fan
- (6) recessed lights and an entry light
- (2) baseboard receptacles
- Refrigerator receptacle
FIRST FLOOR HALLWAY
- 5-gang switch box hallway light/indicator light/?/indicatro light/basement 3-way
DINING ROOM
- Single gang 3-way for sconces
- 2-gang switches chandelier/sconces
- (2) sconces and (1) chandelier
- (3) receptacles
MUDROOM
- 3-gang switches
- Single gang switch, front flood lights
- Post light (150' from home)
- Closet door jam switch and overhead light
FIRST FLOOR POWDER ROOM
- single gang switch and overhead light
LIVING ROOM
- 2-gang switches to switched (2) receptacles
- (6) receptacles out of 8
- (1) dimmer for enclosed porch lighting
ENCLOSED PORCH
- (6) recessed lights
- (4) floor outlets (no basement underneath tile floor)
- Quad receptacles fed from floor outlets
FRONT STAIRWELL
- (2) receptacles
- High foyer chandelier
SECOND FLOOR HALLWAY
- (1) receptacle
- 3-gang switches hallway light/foyer light
- single gang switch hallway light
PRIMARY BEDROOM
- Single gang dimmer
- (4) recessed lights
- (5) receptacles
- Single gang switch and ceiling light in bedroom nook
PRIMARY BEDROOM CHANGING ROOM
- (4) receptacles
- 3-gang switches, center light, primary closet light
single gang switch for possible outdoor lighting (needs further investigation)
- Single gang for closet light
CHANGING ROOM CLOSET
- Door jam switch and overhead light
PRIMARCity of Philadelphia · 2026
REPLACE WIRING BY FISHING WIRING THROUGHOUT MAKING NOTCHES AND HAND HOLES UTILIZING EXISTING 100A SERVICE AND PANEL.
BASEMENT
- Supply and install new circuits for (4) basement lights and new switches and plates.
- Supply and install new circuit and receptacle for washing machine.
Supply and install new circuit and switch for gas boiler.
FIRST FLOOR
- Supply and install new circuit for (1) receptacle and plate for dining room.
- Supply and install new circuit for (2) receptacles and plates for living room.
- Supply and install new circuit for (1) receptacle and plate for foyer.
- Supply and install new circuit for (1) living room ceiling fan with switch and plate.
- Supply and install new circuit for (1) foyer light with switch and plate.
SECOND FLOOR
- Supply and install new circuit for (1) hallway light with switch and plate.
- Supply and install new circuit for (1) rear bedroom light with switch and plate.
- Supply and install new circuit for (1) rear/middle bedroom light with switch and plate.
- Supply and install new circuit for (1) front/middle bedroom light with switch and plate.
- Supply and install new circuit for (1) front primary bedroom light with switch and plate.
Republishing these numbers? A link back is all we ask — one click copies a ready credit you can paste into any post.
Are you Ace Hardware Home Services, Inc.?
This profile was built from public permit records. Claim it free to add your photo, phone, and website, so the homeowners landing here can actually reach you.
Add this Permit-Verified badge to Ace Hardware Home Services, Inc.'s website. It links to this profile so homeowners can see the public permit record behind your work.
Track record sourced from public building-permit records. Figures reflect permitted projects, not self-reported work. Listed on Proven Pros.
City of Philadelphia · 2026
FISHING WIRING WITHIN WALLS AND CEILINGS THROUGHOUT HOME
FOYER HALL
- Supply wiring to and install new LED recessed fixture and trim as specified. (1)
- Install wiring, box, and device for 3-way dimming. (2)
- Install Lutron Caseta dimming for new LED recessed light. (2)
BEDROOM HALL
- Supply wiring to and install new LED recessed fixtures and trims as specified. (2)
- Install wiring, box, and device for 3-way dimming. (2)
- Install Lutron Caseta dimming for new LED recessed lights. (2)
LIVING ROOM
- Remove and disconnect wiring for existing ceiling light intended for dining table location. (1)
- Supply wiring to and install fixture box and install customer supplied chandelier. (1)
- Supply wiring to and install new LED recessed fixtures and trims as specified. (7)
- Install wiring, box, and device for single pole dimming. (3)
- Install Lutron Caseta dimming for new LED recessed lights. (3)
- Install wiring, box, and device for TV receptacle. (1)
MASTER BEDROOM
- Supply wiring to and install new LED recessed fixtures and trims as specified. (4)
- Install wiring, box, and device for 3-way dimming. (2)
- Install Lutron Caseta dimming for new LED recessed lights. (2) (Caseta tabletop at bedside table)
- Install wiring, box, and device for TV receptacle. (1)
GUEST BEDROOM
- Supply wiring to and install new LED recessed fixtures and trims as specified. (4)
- Install wiring, box, and device for 3-way dimming. (2)
- Install Lutron Caseta dimming for new LED recessed lights. (2) (Caseta tabletop at bedside table)
MISC.
- Complete programming and phone integration of Lutron Caseta System.City of Philadelphia · 2026
REPLACE WIRING BY FISHING WIRING THROUGHOUT MAKING NOTCHES AND HAND HOLES
First Floor
Living Room
- (1) ceiling light switch
- (1) stairwell light 3-way switch
- (1) ceiling light fixture.
Dining Room
- (1) ceiling light switch
- (1) ceiling light fixture
Kitchen
- (1) ceiling light switch
- (1) ceiling light fixture
Second Floor
Front Bedroom
- (1) ceiling light switch
- (1) ceiling light fixture
Hallway
- (1) hall light switch
- (1) living room 3-way switch
- (1) hall light fixture
Middle Bedroom
- (1) ceiling light switch
- (1) ceiling light fixture
Third Floor
Front Bedroom
- (1) ceiling light switch
- (1) ceiling light fixture
Hallway
- (1) ceiling light switch
- (1) second floor hall light 3-way switch
- (1) hallway light fixture
Rear Bedroom
- (1) ceiling light switch
- (1) ceiling light fixture
200-amp Service Upgrade
- Shut down power at panel and remove meter.
- Disconnect taps from utility and remove 200 amp service cable, meter socket.
- Remove service cable from main breaker panel.
- Remove main breaker panel.
- Supply and install 200 Amp service cable, PVC weather head strap securely to building to new meter socket.
- Supply and install a 200 Amp aerial fed meter socket with weather-proof hub and emergency disconnect.
- Supply and install a 200 amp, 40 space, main breaker load center
- Supply wiring from new meter socket to main breaker of new load center panel.
- Supply all required bonding and grounding of new service.
- Supply and install all required branch circuit breakers.
- Supply and install whole home surge protection in new panel.
- Make all mains and branch circuit terminations.
- Identify circuits and place panel schedule.
- Prepare a drip leg and make insulated splice connection to utility feeders.
- Re-install meter into socket, energize and test circuits.City of Philadelphia · 2026
EZ PERMIT DUCTWORK & WARM-AIR APPLIANCES- For the installation of New Ductwork, Registers/Grilles/Diffusers, and Warm-Air Appliances as per attached standards. Deviations from these standards require submission of construction and site plans.
Location of rooftop equipment as shown in uploaded doc in File Notes tab (from previous, cancelled permit for proposed work). Mechanical equipment is being installed on roof out of public view, replacing current equipment and new equipment is being installed in the same location as existing. No work to exterior windows and/or doors as part of this permit. Aside from mechanical equipment, no other work to exterior permitted as part of this permit(As per PHC conditions).
Install (1) ductless Mitsubishi systems- 12,000 BTUs
Install (1) 1-1 Mitsubishi system 36K BTUs, connecting to existing supply & return duct. Relocate the indoor unit, add 1 return grill to the first floor, install 3 pieces of 12x25 trunk duct to extend return to the new location, and 1 additional 12x25 for our return drop.City of Philadelphia · 2026
EZ PERMIT STANDARDS ALTERATIONS- For alterations to an Existing One Family Dwelling as per attached standard. Deviations from this standard will result in permit revocation and require submission of construction plans. Separate permits are required for plumbing and electrical work and the installation of heating/cooling appliances. STRUCTURAL ALTERATION OR REPAIR IS EXPRESSLY PROHIBITED UNDER THIS PERMIT. PROHIBITED STRUCTURAL WORK INCLUDES ANY MODIFICATION TO EXTERIOR WALLS, PARTY WALLS, FLOOR/ROOF FRAMING OR FOUNDATIONS; INCLUDING UNDERPINNING, EXCAVATION, AND REMOVAL OF FOUNDATION SLAB. NO WORK MAY BE PERFORMED IN THE BASEMENT OR CELLAR.
See MP-2026-001323.
Location of rooftop equipment as shown in uploaded doc in File Notes tab (from previous, cancelled permit for proposed work). Mechanical equipment is being installed on roof out of public view, replacing current equipment and new equipment is being installed in the same location as existing. No work to exterior windows and/or doors as part of this permit. Aside from mechanical equipment, no other work to exterior permitted as part of this permit(As per PHC conditions).
Applying for a building permit in order to file and be approved for the mechanical permit. No building alterations is required.
Mechanical work being done is to install (2) Mitsubishi system.City of Philadelphia · 2026
SERVICE UPGRADE
- Shut down power at panel and remove
meter.
- Disconnect taps and remove 100 amp
service cable, meter socket.
- Remove service cable from 100A main
breaker panel.
- Remove 100A main breaker panel.
- Supply and install 200 Amp service cable,
PVC weather head strap securely to building
and to new disconnect and meter socket.
- Supply and install a 200 Amp aerial fed
meter socket with weather-proof hub.
- Supply and install a 200 amp, 40 space,
main breaker load center
- Supply wiring from new meter socket to
main breaker of new load center panel.
- Supply all required bonding and grounding
of new service.
- Supply and install all required branch circuit
breakers.
- Make all mains and branch circuit
terminations.
- Identify circuits and place panel schedule.
- Prepare a drip leg and make insulated
splice connection to Peco feeders.
- Re-install meter into socket, energize and
test circuits.City of Philadelphia · 2026
Install all wiring for bedrooms, bedroom hall & laundry, (3) bathrooms, 2nd floor stairway & landing, family room, front bedroom/hall/closet, front bedroom bath, front exterior & entry, living room, dining room, kitchen, stairs & landing, powder room, rear hallway & laundry, bedroom, bedroom bath, garage, car charger receptacle, rear exterior, dumbwaiter, cat6 & fiber optic cable ,2 feeder panels (all from existing 400A 2phase system). PER APPROVED DRAWINGS-2017 NEC.
**Any change in service from existing 400A 2phase service will require an amended permit**City of Philadelphia · 2026
>>>ALL WIRING VIA FISHING/SURFACE MOUNT<<<
MAIN SERVICE
- Shut down power at panel and remove meter.
- Disconnect taps from utility company and remove 60 amp service cable and conduit.
- Remove main breaker panel and load-side service cable from meter to panel.
- Supply and install new 100 Amp service cable and PVC weather head.
- Sleeve wire in PVC conduit the last 10' until wire enters house.
- Supply and install a 100 Amp aerial fed meter socket.
- Supply and install a 100 amp, 20 space/40 circuit main breaker load center.
- Supply all 2nd ground rod to properly bond and ground new service.
- Supply and install all required branch circuit breakers and complete all terminations.
- Identify circuits and place panel schedule.
- Prepare a drip leg and make insulated splice connection to feeders.
- Re-install meter into socket, energize and test circuits.
- Supply and install wiring, box, and GFI receptacle by panel as per code.
LAUNDRY
- Replace existing receptacle with new tamper resistant 20 amp GFI receptacle and plate. Replace box with new to accommodate GFI receptacle. Sleeve existing wire down wall in PVC conduit.
BASEMENT LIGHTS
- Remove and replace (2) existing basement pull chain incandescent fixtures with new 7" round, flat, LED light fixtures.
- Supply and install wiring and box and a 3rd 7" round, flat, LED light fixture.
- Supply required wiring to ensure all lights are controlled by the switch at top of stairs.
BASEMENT JUNCTION BOXES
- Supply and install blank covers and knockout seals on junction boxes where required.
LIVING ROOM
- Supply and install all wiring, box, device and plate for tamper resistant convenience receptacle. Install arc-fault breaker as required by code. (Receptacles on party walls will have to be install using surface-mounted Wiremold boxes)
DINING ROOM
- Supply and install all wiring, box, device and plate for tamper resistant convenience receptacle on a 20 amp circuit. Install arc-fault breaker as required by code. (ReceptacCity of Philadelphia · 2026
Supply and install all wiring, circuit breaker, and disconnect for a dedicated 30A/220V mini-split unit located on the exterior of the building at the specified location. Wiring shall be fished, properly terminated, energized, and tested. ALL WORK TO BE DONE ACCORDING TO THE 2017 NEC.City of Philadelphia · 2025
EZ PERMIT DUCTWORK & WARM-AIR APPLIANCES - For the installation of New Ductwork, Registers/Grilles/Diffusers, and Warm-Air Appliances as per attached standards. Deviations from these standards require submission of construction and site plans.
Replace high velocity system for 1st, 2nd, and 3rd floors. Install (2) outdoor units on side of home. (1) 54,500/ 56,000 BTU's/ 5 ton and (1) 34,200/ 34,600 BTU's/ 3 ton.City of Philadelphia · 2025
EZ PERMIT DUCTWORK & WARM-AIR APPLIANCES - For the installation of New Ductwork, Registers/Grilles/Diffusers, and Warm-Air Appliances as per attached standards. Deviations from these standards require submission of construction and site plans.
Mechanical equipment is being installed on roof out of public view, replacing current equipment and new equipment is being installed in the same location as existing. A representative of contractor confirmed the location as seen in image uploaded to File Notes, file name: [9 Alder Ct - Mech Equip Location - MP-2025-005569]. No other equipment or exterior work is being performed(As per PHC conditions).
No work to exterior windows and/or doors as part of this permit.
No work to front facade as part of this permit.
Exterior work is limited to installation of mechanical equipment on roof, any additional work requires further PHC review(As per PHC conditions).
Install (2) ductless Mitsubishi systems. (1) 36,000 BTU and (1) 12,000 BTUCity of Philadelphia · 2025
Permitted projects on public record. Addresses are omitted for privacy.
