Switchgear Main Breaker Section Replacement and Power Restoration
1. Mobilize to site and access electrical panel, switchgear, and associated transformer location
2. Remove damaged main breaker section of existing switchgear, including compromised bussing and insulators
3. Coordinate material procurement and supply new main breaker section compatible with existing switchgear
4. Prepare existing feeder conductors by pulling slack from conduit as needed to restore proper length for termination
5. Install and secure new main breaker section to existing switchgear lineup, including bolting and grounding
6. Re-terminate feeder conductors to new bussing and reinstall main breaker per manufacturer requirements
7. Verify all mechanical and electrical connections are properly installed
8. Test switchgear and associated systems for proper function, including building lighting and fire alarm circuits
9. Coordinate readiness for utility (SMUD) to restore power
10. Clean up work area and return site to prior condition
11. Take photos documenting completed installationSacramento County · 2026$65,000
Replace the existing failing boiler system for over 200 units needing hot waterSacramento County · 2026$60,000
1. Replace damaged 400A panel.
2. Pull new feeder wires from exterior switchgear to the new 400A panel (underground conduit already exists).
3. Terminate feeder wires to the new panel and the existing 400A main breaker.
4. Run necessary electrical to restore power to the alarm system, fire alarm system, and fire bell. Existing receptacles and raceways within 40' of the panel will be utilized where practical; additional field coordination and verification are required to finalize routing.
5. Run necessary electrical to restore power to the exterior building lighting.
6. Install a time clock (in place of the former EMS) to control the exterior building lights.
7. Run necessary electrical to power HVAC units 1, 2, 3, and 4. . If additional damage is discovered, a change order may be required; contact office immediately.
8. Test all restored circuits and equipment for proper function.
9. Supply and install (5) 20 amp circuits to data and fire alarm panels.
10. Supply and install (4) 20 amp circuits for exterior lighting.
11. Supply and install (3) 20 amp circuits for interior lighting.
12. Supply and install 7- day Astro Timer digital to control interior lighting
13. Remove and replace (2) fluorescent fixtures with new 96" vapor tight fixtures.
14. Remove and replace (1) damaged LED wall pack.
This profile was built from public permit records. Claim it free to add your photo, phone, and website, so the homeowners landing here can actually reach you.
Track record sourced from public building-permit records. Figures reflect permitted projects, not self-reported work. Listed on Proven Pros.
Sacramento County · 2026
$49,000
Disconnect and remove the existing non-functional boiler. We installed a new Lochinvar Boiler AWH0500 connected all electrical and water lines and gasline connections, and reconnected all vent connections. Purged the system of air from apartments 118 and 120. The Lochinvar did the start-up with the system and then tested the boiler.Sacramento County · 2026$21,000
Removal of the existing water heater for the Laundry building between buildings 17 and 18. Install a new 75-gallon natural Gas water heater, with an expansion tank, a new pan, and ball-valve, and earthquake straps.Sacramento County · 2025$6,800
Removal of the existing water heater for unit 147 in building 18. Install a new water heater pan, 40 gal natural gas water heater, expansion tank, new ball valve, and new flex hot and cold water linesSacramento County · 2025$3,900
Bring the existing water heater up to code by installing a new water heater pan, expansion tank, new ball valve, and new flex hot and cold water lines, and earthquake strapsSacramento County · 2025$5,900
SUBJECT TO FIELD APPROVAL
6930 Fair Oaks Blvd- Building 17
Unit 141 replaces the existing 40-gallon water heater, installs a new ball valve, and installs an expansion tank.
Unit 142 brings the existing water heater to code, installs a new ball valve, expansion tank, new flex hot and cold line, and drain pan and strapping
Replace 40 gallon water heater unit 141, Bring 40 gallon water heater up to code and install pressure tanks for unit 142Sacramento County · 2025$6,800
Replace Bussing at Main Breaker
This quote contains all of the time and material needed to complete the following:
Scope of Work
1. Obtain necessary replacement parts for failed buss at main breaker for Unit 27, Building D
2. Contact SMUD to schedule temporary power disconnection
3. Remove failed bussing and install new bussing at main breaker
4. Wait onsite for Sacramento County inspection
5. Upon passing inspection, contact SMUD to reconnect power
6. Test electrical system for proper function after reconnection
7. Clean up the site to prior condition
8. Take photos of completed workSacramento County · 2025$1,900
Converted from MISR2023-03130.
-Secure city permits for the repairs prior to starting the work
-Mark area for the utility survey
-Call in USA-811 48 hours prior to excavation
-Saw cut and jackhammer a 4'x4' section of the sidewalk by7121 unit 28
-Remove rectangular concrete electrical christy box
-Excavate to find the sewer waste line
-Remove the compromised section of pipe up to 4'
-Install new new section of pipe and fittings up to 4'
-Backfill and set new christy box in the sidewalk area
-Pour back the concrete with a broom finish
-Dispose of the old pipe material and concreteSacramento County · 2025$3,589
- Secure County permits for the repairs prior to starting the work
- Mark area in white paint for utility survey
- building 7121 unite 19-28
- Call in USA-811 Utility Survey 48 hours prior to excavation
- Excavate the area to expose the existing sewer line pipe and fittings
- Remove a section of the existing sewer line pipe
- Install a 2 way clean out for 2-way access Bldg 7121, new
section of pipe with couplers
- Before backfilling test 4' sewer line for proper function and flow
- Backfill the hole and sub compact
- Dispose of materials generated form the repairSacramento County · 2025$2,600
Add (2) new 15 amp 208v circuits (circuits 1,3 and 2,4) to (2) new L6-15R outlets for (2) new machinesSacramento County · 2025$5,052
Permitted projects on public record. Addresses are omitted for privacy.