What the public permit record shows, not self-reported reviews.
Is ELITE FINISH GUY INC a real contractor?
ELITE FINISH GUY INC appears in public building-permit records with 4 permits filed through 2026 in and around City of Sacramento, CA. Permits are filed with local government before work begins, so this is a matter of public record, not a self-reported listing.
How is ELITE FINISH GUY INC's track record verified?
Every figure on this page comes from building permits pulled from municipal records and matched to ELITE FINISH GUY INC by the contractor name on each permit. Permit records cannot be purchased or faked the way online reviews can, which makes them a stronger signal of real, completed work.
Is ELITE FINISH GUY INC licensed and insured?
This profile is built from permit records, which confirm permitted work but do not include license status. ELITE FINISH GUY INC has not claimed this profile to add license or insurance details. Confirm licensing directly with your state or local board before hiring.
How recent is ELITE FINISH GUY INC's work?
The most recent permit on record for ELITE FINISH GUY INC is dated 2026-05-11, with 4 permits on file in total.
TO LEGALIZE PREVIOUS ADDITION TO RESIDENCESacramento County · 2026$199,396
EPC - Reframe wall wear car hit building, Sheetrock, exterior sheet wall, replace floor, replace dry rotted floor, replace subfloor, replace any dry framing stucco exterior walls. Full kitchen / bathroom remodelCity of Sacramento · 2024$27,500
UNIT 1 - Reframe wall wear car hit building, Sheetrock, exterior sheet wall, replace floor, replace dry rotted floor, replace subfloor, replace any dry framing stucco exterior walls. Kitchen / bathroom remodelCity of Sacramento · 2024$27,500
1. Install new gas wall furnace in Units 6 and 10 (remove unpermitted electric baseboard heaters)
2. Provide new 100A house subpanel in utility room (properly size feeder conductors, provide required minimum work clearances about elec. equipment, provide proper termination of grounding and bonding, etc)
3. Remove all unapproved and unpermitted electrical installations throughout (common area lighting wired off of individual dwelling units, etc.)
4. Provide new wiring and site lighting required for means of egress illumination fed from house panel
5. Replace missing globe covers and/ or lighting fixtures at front entry of each individual dwelling unit
6. Provide new 10yr carbon monoxide and smoke detectors in every unit (Units 1 - 10) as required
7. Replace Unit 3 main breaker to match panel listing and not to exceed maximum subfeeder ampacity
8. Installation of unpermitted 75G water heater to meet minimum code (seismic strapping, T&P drain line, sediment trap, etc.)
9. Properly seal/ patch all building penetrations/ openings throughout
10. Provide contrasting color striping at exterior stairs upper approach and all treads (stripe shall be a minimum of 2 inches wide to a maximum of 4 inches wide placed parallel to, and not more than 1 inch from, the nose of the step or upper approach. The stripe shall extend the full width of the step or upper approach and shall be of material that is at least as slip resistant as the other treads of the stair. A painted stripe shall be acceptable to satisfy this requirement).
11. Tear-off, re-sheet and re-roof (approx. 60 squares). COOL ROOF REQUIRED.
ALL WORK SUBJECT TO FIELD INSPECTION.
Republishing these numbers? A link back is all we ask — one click copies a ready credit you can paste into any post.
Are you ELITE FINISH GUY INC?
This profile was built from public permit records. Claim it free to add your photo, phone, and website, so the homeowners landing here can actually reach you.
Add this Permit-Verified badge to ELITE FINISH GUY INC's website. It links to this profile so homeowners can see the public permit record behind your work.